3M C2254PW Betriebsanweisung PDF herunterladen (Seite 15)

3M™ Multi-Touch Chassis Display User Guide 15

3M Touch Systems, Inc. Proprietary Information – TSD-37732F

Access to the Video Controls

The Multi-Touch Chassis Display has five buttons for using the on-screen menu and

adjusting the video display. These controls are located on the back of the Multi-Touch

Chassis Display. These buttons let you display the on-screen menu and adjust the phase,

image position, contrast, and brightness. Make sure you will be able to access the video

controls once the Multi-Touch Chassis Display is installed.

If enclosure space is tight and access is important, an on screen display remote control

(part number 30114) is an option.

Clearance and Ventilation

Leave at least two inches of clearance space behind the Multi-Touch Chassis Display for

proper ventilation. Units have vent holes at the top and bottom on the back of the chassis

-- ensure these holes are not blocked during installation. Always maintain adequate

ventilation to protect the display from overheating and to ensure reliable and continued

operation.

Refer to the published specifications for the maximum and minimum operating

temperature and humidity conditions. Refer to the product data sheet on the 3M Touch

Systems website at http://www.3m.com/touch/

Video Card Requirements

Before you connect your touch display, make sure your computer has a video card

installed that supports the native video resolution of 1680 x 1050 for the Multi-Touch

Chassis Display. If you need information on installing a video card or video driver, refer

to the manual that came with your video card.

Using the Standard Controls for the Video Card

In addition to the standard controls on the display, each video card has several controls

that let you adjust the display settings. The software and driver for each video card is

unique. In most cases, you adjust these settings by using a program or utility provided by

the manufacturer of the video card.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Keine Kommentare

3M C2254PW Betriebsanweisung Seite 15